Fire Sci. Eng. Search

CLOSE


Fire Sci. Eng. > Volume 31(6); 2017 > Article
Fire Science and Engineering 2017;31(6):33-39.
DOI: https://doi.org/10.7731/KIFSE.2017.31.6.033    Published online December 31, 2017.
복합패널 화재확산 방지를 위한 소화시스템의 소요유량 산정을 위한 실험적 연구
박병직, 신현준, 유용호, 박진욱, 김휘성, 김양균
1한국건설기술연구원
2한국건설기술연구원
3한국건설기술연구원
4한국건설기술연구원
5한국건설기술연구원
6한국건설기술연구원
Experimental Study to Estimate the Required Flow of Fire Extinguishing System for Flame Spread Prevention on Composite Panel
Park Byoung-Jik, Shin Hyun-Jun, Yoo Yong-Ho, Park Jin-Ouk, Kim Hwi-Seong, Kim Yang-Kyun
1Korea Institute of Civil Engineering and Building Technology
2Korea Institute of Civil Engineering and Building Technology
3Korea Institute of Civil Engineering and Building Technology
4Korea Institute of Civil Engineering and Building Technology
5Korea Institute of Civil Engineering and Building Technology
6Korea Institute of Civil Engineering and Building Technology
요약
복합패널은 다른 종류의 재료를 샌드위치 모양으로 쌓아 올려 접착제로 접합한 특수 합판으로서, 시공성 및 경제성이 좋기 때문에 건축물 재료로 많이 사용되고 있다. 그러나 표면판은 철판 재질로 되어 있기 때문에 화재 시 일반적인 소화설비를 이용한 소화방법이 외부의 철판에 막혀 심재 부분의 화원에 도달하지 못하여 소화를 하는데 어려움이 있으며, 화재 시 붕괴에 따른 소화활동에도 어려움이 많다. 본 연구에서는 이와 같은 문제를 해결하기 위하여 복합패널의 심재에 소화배관을 설치하여 화재 시 화재확산을 방지할 수 있는 소화설비시스템에 대하여 연구하였다. 소화시스템의 소화용수의 소요유량을 산정할 수 있도록 수공급 시험 장치를 제작하여 최소량의 소화수를 사용하여 화재확산을 방지할 수 있게 하였다. 또한 실물화재 실험을 통하여 최적의 공급유량(0.5 L/min)을 설정하였다.
Abstract
Composite panel refers to the particular plywood produced in a way of stacking the different kinds of material in sandwich form and adhering them using adhesives and is widely used as building material for its constructability and cost efficiency. But as the surface is finished with steel plate, fire extinguishing agent cannot reach to the core material because of such steel plate on surface which causes the difficulties in suppressing the fire as well as in fire-fighting activities due to collapse. This study, to deal with such problem, is intended to set the fire pipe in core material to prevent the fire from spreading and in a bid to achieve this using minimized fire water, water supply test device was fabricated to estimate the required water flow of fire extinguisher and consequently, optimal water flow (0.5 L/min) was determined through a full-scale fire test.
Key Words: Flame Spread Prevention, Real-scale Fire Test, Composite Panel


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next