Fire Sci. Eng. Search

CLOSE


Fire Sci. Eng. > Volume 33(3); 2019 > Article
Fire Science and Engineering 2019;33(3):105-111.
DOI: https://doi.org/10.7731/KIFSE.2019.33.3.105    Published online June 30, 2019.
건축물 외장재의 화재확대방지를 위한 보수구법 및 보수재료 검토에 관한 연구
이병흔1, 진승현1, 박성하2, 권영진3
1호서대학교 소방방재학과 대학원생
2(주)융도엔지니어링 기업부설연구소 사원
3호서대학교 소방방재학과 교수
A Study on the Review of Repair Methods and Repair Materials for the Prevention of Fire spread of Building Exterior Materials
Byeong-Heun Lee1, Seung-Hyeon Jin1, Sung-Ha Park2, Young-Jin Kwon3
1Graduate Student, Dept. of Fire & Disaster Protection Engineering, Hoseo Univ.
2Employee, Yungdo Engineering & Consultatns, Inc.
3Professor, Dept. of Fire & Disaster Protection Engineering, Hoseo Univ.
Correspondence:  Young-Jin Kwon, Tel: +82-41-540-5497, Fax: +82-41-540-5738, 
Email: jungangman@naver.com
Received: 28 January 2019   • Revised: 3 April 2019   • Accepted: 14 May 2019
요약
국내의 경우 2018년도에 시행한 가연성 외장재 설치 건축물 현황조사결과 147,559동의 건축물이 이에 해당되는 것으로 조사되었으며, 상층부 및 인접건축물로의 화재확대사례는 연간 약 3,500건, 외장재에서 시작한 화재건수는 연간 약 1,500건 이상 발생하는 등 의정부 화재, 제천스포츠센터 화재와 같은 유사한 화재발생의 위험성이 내포되어 있다. 본 연구에서는 유사한 화재 재발방지를 위해 가연성 외장재가 시공된 건축물의 보수공법에 대해 조사하고 각각의 보수재료 성능검증을 실시하였다. 보수방법의 경우 기존의 건축물 마감재를 제거한 뒤 보수재료로 보강하는 방법과 기존 마감재를 제거하지 않고 면고르기를 실시한 뒤 보수재료를 부착하는 방법을 제안했다. 또한 드라이비트 및 보수재료로서 방화석고보드, 미네랄 울, 경질우레탄 폼, 세라믹보드, ALC 패널 등 6가지 재료를 대상으로 콘 칼로리미터 시험을 실시하고 해당 재료들에 대한 기초 연소 성능을 조사하였다.
Abstract
In Korea, the results of a field survey on the construction of flammable exterior materials implemented in 2018 revealed that 147,559 buildings belong to this category. It was found that the fire spreading cases in upper and adjacent constructions are about 3,500 per year, the fires of starting in flammable exterior material are about 1,500 per year. In this study, we investigated the repair method of buildings constructed by flammable exterior material and conducted performance verification of each repair materials for prevention of similar fire. In the case of the repair method, a method of reinforcing with a repair material after removing the existing building finishing material and a method of attaching the repair material after performing the face finishing are proposed. In addition, we conducted cone calorimeter tests of 6 materials such as fireproof gypsum board, mineral wool, hard urethane foam, ceramic board and ALC panel as dryvit and repairing materials, and investigated basic combustion performance of that materials.
Key Words: Fire safety, Combustible insulation, Fire spread prevention, KS F ISO 5660-1


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next