J. Kor. Inst. Fire Sci. Eng. Search

CLOSE


Journal of Korean Institute of Fire Science and Engineering 2010;24(1):1-7.
Published online February 28, 2010.
밀도에 따른 지표 연료의 연소실험 분석
김응식, 김장환, 김동현, 박형주, 김정훈
1호서대학교 안전보건학과2호서대학교 안전보건학과3국립산림과학원 산불연구과4호원대학교 소방행정학부5호서대학교 안전보건학과
A Combustion Analysis of Surface Fuel Burning Experiment According to Density Variation
Kim Eung-Sik, Kim Jang-Hwan, Kim Dong-Hyun, Park Hyung-Ju, Kim Jeong-Hun
요약
본 연구에서는 지표화의 대표적인 연소물질인 굴참나무(Quercus Variabilis: Q.V.)와 소나무(Pinus Densiflora: P.D.) 낙엽을 이용하여 연료의 밀도 변화에 따른 열 유체속도, 연소온도, 질량감소속도, 화염높이 및 연소시간 등의 연소특성을 분석하였다. 바스켓 높이는 10cm, 지름 20, 30, 40 그리고 50cm의 원통형 바스켓에 밀도별로 각각 채운 후 표면에 점화원을 인가하여 실험을 실시하였다. 침엽수종 낙엽의 경우 밀도와 지름의 증가함에 따라 질량감소속도, 화염지속시간, 화염의 높이 그리고 연소시간은 증가한 반면, 활엽수종 낙엽의 경우 질량감소속도와 화염높이는 증가하다가 감소하였으며 화염지속시간과 연소시간은 증가하였다. 또한, 기체유속 및 온도는 화염 높이가 커질수록 증가하는 경향을 나타내었다.
Abstract
This paper shows combustion characteristics of fallen leaves of Quercus variabilis and Pinus densiflora according to variation of mass densities. Combustion temperature, mass loss rate, flame height, duration of combustion and velocity of hot gas are measured and analyzed. For the experiment 10cm heighted baskets with varying diameters of 20, 30, 40 and 50cm are used for the combustion and the pilot ignition is carried on the top of the fuel. In case of Pinus densiflora mass loss rate, duration of flame, flame height and combustion time become larger as the mass density and diameter of basket increase, on the other hand Quercus variabilis shows saturation characteristics in mass loss rate and flame height. Velocity of hot gas is proportional to flame height.
Key Words: Surface forest fire, Density, MLR, Combustion time, Flame height


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next